- November 21, 2026
- By
- Blog
A code on an Electrical Installation Condition Report can look alarming, particularly when it sits beside wording such as ‘danger present’ or ‘further investigation required’. Understanding EICR observation codes means knowing what needs urgent attention, what can be planned, and why a qualified electrician has recorded the issue in the first place.
An EICR is not simply a pass-or-fail check of sockets and lights. It is a detailed assessment of the fixed electrical installation, including the consumer unit, circuits, earthing, protective devices, accessories and visible condition of the wiring. The report records whether the installation is safe for continued use at the time of inspection and identifies defects against the current requirements of BS 7671.
What EICR observation codes are designed to tell you
During an inspection, an electrician compares the installation with the safety requirements that apply today, while taking account of its age, design and intended use. Not every older feature is automatically unsafe. A property does not need to be brought entirely up to the latest standard just because the regulations have changed.
Observation codes are used where a defect, potential danger or limitation has been found. They help you and, where relevant, your landlord or managing agent understand the level of risk and decide what happens next. The code is not a quote for work, nor is it a judgement on how well a property has been maintained. It is a clear record of the condition found on the day.
The most common codes are C1, C2, C3 and FI. Their meaning matters because they affect whether an EICR is classed as satisfactory or unsatisfactory.
Understanding EICR observation codes: C1, C2, C3 and FI
C1: Danger present
A C1 observation means there is immediate danger. Someone could be at risk of electric shock, burns or fire if the installation remains in use as found. Where it is safe and practical to do so, the electrician may make the area safe straight away, for example by isolating a circuit or fitting a temporary protective measure.
Examples can include exposed live parts, damaged equipment that leaves conductive parts live, or a serious fault that presents a clear and immediate risk. A C1 makes the report unsatisfactory and should be dealt with without delay. Do not keep using the affected circuit simply because power is still available.
C2: Potentially dangerous
A C2 means the issue is potentially dangerous and urgent remedial work is needed. There may not be an immediate hazard at the exact moment of inspection, but a fault, damaged component or inadequate protection could become dangerous under normal use or in a fault condition.
For example, a circuit without appropriate protection, signs of overheating within a consumer unit, or a problem with earthing or bonding may result in a C2. The precise reason will be written in the observation itself. C2 items also make an EICR unsatisfactory, so they should be prioritised rather than left until a future refurbishment.
C3: Improvement recommended
A C3 recommendation identifies an improvement that would enhance safety but does not make the installation unsatisfactory on its own. It is often associated with older installations that were acceptable when installed but do not provide the same level of protection expected in a modern home.
A typical example might be an older consumer unit without modern residual current device protection on circuits where it would now be expected. The right response depends on the installation, the property’s use and your future plans. If you are already considering a consumer unit upgrade, rewire or kitchen refurbishment, addressing a C3 at the same time can be sensible and cost-effective.
A C3 should not be ignored without thought, but it is different from a C1 or C2. It does not mean the electrician has found an immediate fault that makes the property unsafe for continued use.
FI: Further investigation required
FI means further investigation is required without delay. The inspector has found something that cannot be safely assessed during the EICR, or evidence suggesting a potentially serious defect may be present. It may involve concealed wiring, an intermittent fault, unexplained readings or equipment that needs more detailed testing.
An FI observation makes the report unsatisfactory until the issue has been investigated and the outcome recorded. It is not safe to assume the result will be minor. Equally, it does not automatically mean the installation needs a full rewire. Proper fault finding is needed before the cause and remedy can be confirmed.
Why an EICR can be unsatisfactory
An EICR is usually recorded as unsatisfactory where it contains one or more C1, C2 or FI observations. This does not necessarily mean every circuit in the property is dangerous, or that the whole electrical installation must be replaced. It means there is at least one issue requiring action before the installation can be regarded as satisfactory.
The wording beside each code is as valuable as the code itself. A clear report should identify the location, circuit or item concerned and explain the concern in practical terms. If anything is unclear, ask your electrician to talk you through it. Plain-English advice helps you make an informed decision, especially where several observations have been recorded.
Once remedial work has been completed, the electrician should provide appropriate confirmation of what was corrected. Depending on the work, this may be a minor electrical installation works certificate, an electrical installation certificate, or written confirmation attached to the original report. A new EICR is not always required, although it can be the most straightforward way to verify a larger programme of remedial work.
What landlords need to do with coded observations
For landlords in England, electrical safety standards require the fixed installation to be inspected and tested at least every five years, or sooner if the report recommends it. Where the report identifies remedial work or further investigation, it must generally be completed within 28 days, or earlier where the report specifies a shorter period.
Keep the EICR, evidence of remedial work and any certificates together. These documents demonstrate that issues have been identified and acted upon, while also giving you a useful record for future maintenance. Requirements can differ across the UK, so landlords with property in Wales or elsewhere should check the rules that apply to their location and tenancy.
For tenants, a coded observation is a reason for prompt communication, not panic. Report any burning smell, repeated tripping, damaged sockets, loose accessories or loss of power straight away. If there is an immediate concern, avoid touching the affected equipment and seek urgent help from a competent electrician.
What homeowners should do after receiving an EICR
Start by separating urgent items from planned improvements. C1 and C2 observations, along with FI items, need prompt action. A C3 can usually be considered alongside your budget and planned improvements, but it remains useful information about the protection in your home.
Do not choose a remedy based on the code alone. The best option depends on the condition of the installation, the age of the consumer unit, whether circuits are overloaded, and whether you are planning alterations. Replacing a damaged accessory may be a small repair. Widespread ageing wiring, repeated faults or an outdated fuse board may call for a broader solution.
Avoid the temptation to carry out electrical repairs yourself. Electrical work can appear straightforward until it involves hidden faults, inadequate earthing or a circuit that has been incorrectly altered in the past. A competent electrician can test the work properly, explain the options and ensure the remedial work meets current BS 7671 requirements.
A report should lead to clear action, not confusion
The purpose of an EICR is to prevent small concerns becoming shocks, fires, damaged appliances or disruptive power failures. Codes give the report structure, but the practical value lies in understanding the risk and taking proportionate action.
For homeowners and landlords around Chester, Gerrard’s Electrical Solutions can explain observations clearly, carry out remedial work neatly and provide the right certification once the job is complete. If a report has left you unsure what to do next, ask for the observations to be explained before making decisions – clear advice is part of keeping a property safe.